Protecting you against surveillance, signal noise and signal jamming

EMP Fleece

​

​Application

In order to meet the requirements of MIL-STD-188-125, two-layer processing is required; the test report from EMCC DR. RASEK refers to a two-layer installation. For professional contractors, our A300-HEMP is a solid basis for a complete shielding concept in accordance with MIL-STD-188-125, in which there are many details to consider: overlaps, doors, windows, cables, ventilation, etc. For all shielding projects that do not require the low-frequency magnetic component, one-layer is completely sufficient, as redundancy is already provided with a single layer.​

​

Processing

Substrate: absorbent and chalky substrates must be pre-treated with our GK5 primer.

​

Bonding: no cellulose adhesive adheres to aluminum; we recommend our PSA pressure-sensitive adhesive, which creates a self-adhesive surface (very good adhesion with wet and dry installation).

​

Overlap: the sheets must be glued with a 5 cm overlap. The edges of the sheets must also be sealed with our shielding tape HNX50 / HNX100.

 

Contact materials: Due to the aluminum layer, a neutral pH value of pH 4-9 must be ensured for all direct contact materials during processing. Grounding This product with an electrically conductive surface has to be integrated into the functionalequipotential bonding (FEB). Please find suitable grounding accessories under "Other products".

​

Installation instructions HERE