top of page

Shielding tape

​

HNX100 shielding tape​​On large surfaces, shielding materials must be overlapped at the edges.

 

Depending on the adhesive and the nature of the material, a small gap is created through which radiation can penetrate. No measures are necessary for simple shielding up to 60 dB.

 

However, if the very high shielding attenuation of high-end materials such as the A300-HEMP is to be exploited to the maximum, it is necessary to use a shielding tape for web edges.

 

​​​​​​​​​​Result: Smooth shielding tapes made of copper or aluminum allow the radiation to pass through the adhesive layer with almost no reduction. With our HNX100 textile shielding tape, the radiation is greatly impeded by the rough surface as it passes through the adhesive layer.

This can massively increase the shielding attenuation at the edges of level crossings.

bottom of page